Audiovox AA9103N Instrukcja Użytkownika Pobierz pdf

SIREN MOUNTING:

1. Find a suitable spot to mount the siren in the engine

compartment (firewall, sidewall, etc.).

2. Using siren bracket as a template, drill (2) 1/8" diameter

holes in mounting surface.

Note: If mounting on the firewall, make certain there is no

interference on the other side of the firewall.

3. Secure bracket using screws provided with kit.

4. Secure siren to the bracket using bolts and lock washers

provided.

WARNING - Open end of siren must point downward to

prevent water collection in horn end of siren.

WIRING:

RED WIRE - Splice to +12 VDC battery source lead of existing

alarm.

BLACK WIRE - Splice to chassis ground lead of existing

alarm.

WHITE w/ BLACK STRIPE WIRE - Connect to the positive

siren output from the alarm module.

Printed in U. S. A. Form No. 128-4503

INSTALLATION GUIDE FOR:

Battery Back-Up

RED WIRE - SPLICE TO +12VDC BATTERY

SOURCE LEAD TO EXISTING ALARM.

WHITE w/BLACK STRIPE - CONNECT TO

THE POSITIVESIREN OUTPUT FROM THE

ALARM MODULE.

BACK-UP SIREN

NOTE: BEFORE MAKING

CONNECTION, MAKE

SURE KEY IS IN THE "OFF"

POSITION AS SHOWN.

NOTE : MAKE SPLICE CONNECTIONS AS CLOSE TO

EXISTING ALARM AS POSSIBLE.



AA-9103N

BLACKWIRE - SPLICE INTO CHAS-

SIS GROUND LEAD OF

EXISTING ALARM.

OFF

AA-9103N 1

Podsumowanie treści

Strona 1 - AA-9103N

SIREN MOUNTING:1. Find a suitable spot to mount the siren in the enginecompartment (firewall, sidewall, etc.).2. Using siren bracket as a template,

Komentarze do niniejszej Instrukcji

Brak uwag

Audiovox AA9103N Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Elementy urządzeń bezpieczeństwa Audiovox AA9103N. Audiovox AA9103N User's Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Elementy urządzeń bezpieczeństwa Audiovox AA9103N