Audiovox PRO9776C Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Systemy kontroli dostępu bezpieczeństwa Audiovox PRO9776C. Model PRO9776C Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 16
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
128-8786b
1 of 16
Page 1
Rev b New Format 5/13
Model PRO9776C
Owners Guide
2 Way LCD Vehicle Security
& Remote Start System
PATENTED: www.voxxintlcorp.com/company/patents
Table Of Contents:
Features Page 2
Options Page 2
Your "Code Hopping" Transmitter Page 3
Arming the System - Active Page 3
Arming Your System - Passive (Automatic) Page 4
Protection While the System is Armed Page 4
Disarming the System Page 5
While the System is Sounding Page 5
Intrusion Warning Signals Page 5
Push Button Receiver Valet/Override/Safety Control Switch Page 6
Manually Overriding Your System Page 6
Programming Your Custom Code Override Page 6 - 7
Eliminating the Normal Arm/Disarm Chirps Page 8
Remote Panic Operation Page 8
Push-Button LED Receiver Safety Control Switch Page 9
Turbo Timer Mode Page 9
Remote Starting the Vehicle Page 10
Operating On Automatic Start Up Timer Mode Page 10 - 11
Telematic Upgrade Page 12
Programmed Transmitter Notification (PTN) Page 13
Programming New or Replacement Transmitters (Bank 1) Page 13
Feature and Function Settings Page 14
Owner's Notes Page 15
System Features at a Glance Page 16
Przeglądanie stron 0
1 2 3 4 5 6 ... 15 16

Podsumowanie treści

Strona 1 - Model PRO9776C

128-8786b1 of 16Page 1Rev b New Format 5/13Model PRO9776COwners Guide2 Way LCD Vehicle Security& Remote Start SystemPATENTED: www.voxxintlcorp.co

Strona 2

128-8786b10 of 16Page 10REMOTE STARTING THE VEH ICLEThe unit WILL NOT start the vehicle if any one of the following conditions exists:1. The vehicle h

Strona 3

128-8786b11 of 16Page 11TO BEGIN THE AUTOMATIC START UP TIMER1. Turn the ignition key on then off.2. Within 10 seconds, activate the RF start comma

Strona 4

128-8786b12 of 16Page 12To activate the optional accessory, press the option button on the keychain transmitter.The optional accessory will immediatel

Strona 5

128-8786b13 of 16Page 13PROGRAMMED TRANSMITTER NOTIFICATION (PTN)Every time after Disarm when the ignition key is turned on, the unit's LED will

Strona 6

128-8786b14 of 16Page 14To purchase replacement transmittersor to get additional product information go to:www.pursuitcarsecurity.comNote: Certain sys

Strona 7

128-8786b15 of 16Page 15OWNER'S NOTES

Strona 8

128-8786b16 of 16Page 16© 2013 Audiovox Electronics Corporation, Hauppauge, NY 11788 128-8786bALARM DASH LED INDICATORSRAPID FLASH

Strona 9

128-8786b2 of 16Page 25 Button Remote Start Security System WithPlug-In Shock Sensor & Starter DisableFEATURES: 2 Five Button Programmable RF Tra

Strona 10 - 10 of 16

128-8786b3 of 16Page 3YOUR “CODE HOPPING“ TRANSMITTERSThe transmitters included with your new security system use the most advancedand secure form of

Strona 11 - 11 of 16

128-8786b4 of 16Page 4SILENT ARMING - ACTIVE (Feature must be activated during programming)During step 2 above, hold the transmitter button for 2 seco

Strona 12 - 12 of 16

128-8786b5 of 16Page 5 Any mild impact to the vehicle’s glass will cause the alarm to sound a shortseries of warning tones. Any strong impact to the

Strona 13 - 13 of 16

128-8786b6 of 16Page 6Enter the vehicle and before turning on the ignition switch, observe the LED flash pattern.If the LED flashes one time...pause,

Strona 14 - 14 of 16

128-8786b7 of 16Page 7advantage of this option, programmable feature # 10 must be selected for the Custom CodeOption. Consult your installation center

Strona 15 - 15 of 16

128-8786b8 of 16Page 8indicatesthat the code has not been changed. You will have to repeat steps 1 through7 above being certain to note the following:

Strona 16 - 16 of 16

128-8786b9 of 16Page 9NOTE: While in the Panic mode, pressing and releasing the Lock, or the Unlock buttons will,if the option is installed, lock and

Komentarze do niniejszej Instrukcji

Brak uwag